Product Catalog

Description

Powerful Baldor Dual Voltage 1.5HP 115V/13.4A 230V/6.7A 60 Hz Electric Motor

  • Motor with Thermal Overload protection
  • Reinforced, jig-welded steel frame minimizes vibration and assures accurate cutting
  • Rugged aluminum conveyor cart for optimum stability, travel
  • Open back design permits orientation for cutting large materials
  • Balanced easy-tilt cutting head gives operator relief in high tempo operations
  • Mounted carrying handles for easy transport
  • Stay-level blade guard for operator safety
  • High flow water pump included

Description

Max depth - 3 3/4"

  • Uses 12 amps
  • 120 lbs

Description

1/2 hp Motor

  • 12" Max Rip Cut Length
  • 8" Diagonally Cuts
  • 5" Blade Capacity
  • 1-1/4" Max Cutting Depth

Description

With 13 feet of vacuum hose and a 62 in. reach, this sander is ideal for finishing drywall in large rooms. The 8-7/8 in. sanding surface covers large areas in one pass.

  • Built in dust collection hose
  • 2-1/4 in. Vacuum hose is 13 ft. long so that large areas can be sanded in one set up
  • 13 ft. Static-dissipating 1 1/4 in. vacuum hose
  • Hook and loop straps for mounting power cord to vacuum hose

Description

Cistern

Description

Master Plumber, 115V, Mini Vac Transfer Pump, With Puddle Scoop/Hose, Performance

Description

Master Plumber, 1/4HP submersible utility pump, 8 ft/ power cord, garden hose adapter, corrosion resistant body, 1790 GPH, Thermoplastic construction, pumps down to 3/16-Inch

PUMP ONLY KICKS IN IF WATER IS ABOVE 6INCHES DEEP

Description

2" Heavy-Duty Trash Pump
•Easily handles leaves, debris, and solids up to 1"

Commercial Grade 5.5-HP Honda OHV GX160 4-Cycle Engine
•Reliable, technologically advanced & easy to start
•Provides excellent torque & fuel efficiency

Protected By Honda Oil Alert® Warning System
•Alerts you or shuts engine down if oil reaches an unsafe level
•Helps to prevent engine seizure due to a low oil condition

High Chrome Impeller & Cast Iron Volute Casing<

Description

for use with 3" pump

Description

for use with 3" pump

Description

for use with 2" pump

Description

Flat sewer rods are used to remove sewer pipeline blockages by inserting the rod into the line via the Y-shaped access fittings periodically installed along the sewer line.

Description

2-4"

Description

1-2"

Description

telescoping

Description

manual 50'

Description

3 wheel

Description

30" drywall mud mixer for drill

Description

Portable Texture Unit is a continous air compressor unit used to provide air flow for the Gun & Hopper. Used to spray drywall mud, texture paints, acoustics, glitter or waterproofing

Description

The EP 2510 Piston Sprayer is ideal for latex through heavy architectural coatings, dry fall and block fillers. Good multi-gun rig. Ideal for heavy commerical, industrial and maintenance applications.

Use with products with a flash point of 70o F / 21oc or greater.

Coatings: Latex, oil base, enamel, elastomeric, heavy architectural coatings, block filler, dry fall.

Easy two-gun hook-up Includes 25' x 3/8" hose

Part Number 0294012
Output 1.25 gpm
Max. pressure 3000 psi

 

Description

quartz 2 light

Description

16" bar

18" bar

20" bar

Homeowner Grade saw

Description

Shreds and blows 2-3 bales of straw in less than a minute

  • Convenient discharge spout and optional 6” diameter flexible hose assure the most accurate directional discharge, operational ease and the ability to handle difficult materials.
  • Ideal solution for proper and precise mulching
  • Provides soil moisture retention and protection against wind damage
  • Discharge head has a 360 degree rotation and 50 degree vertical travel
  • Horizontal, collapsible feed tray which provides the most convenience and operator efficiency for feeding straw bales into the machine. This also eliminates the unnecessary labor involved in hoisting the bales overhead and feeding the machine vertically from the top

Description

for removing shingles