Product Catalog

Description

tilt bed

Description

Size: 6’ x 12’

  • Number of Axles: 1
  • Gross Axle Weight Rating: 6,000 lb
  • Gross Vehicle Weight Rating: 6,000 lb
  • Maximun Tongue Weight: 600 lb
  • Weight of Trailer: 1,660 lb
  • Payload: 4,340 lb
  • Torsion Axle
  • 2-5/16" A-Frame Coupler Included
  • 6 on 5.5" Bolt Circle Hubs
  • Tires: ST235/80R16
  • Rims: 15" White Spoke
  • Oak Decking
  • Hydraulic Brakes included
  • Inside Trailer Width: 72"
  • Overall Trailer Width: 96-1/2"
  • Inside Trailer Height: 16"
  • Overall Trailer Height: 33"
  • Inside Trailer Length: 144"
  • Overall Trailer Length: 206"
  • Floor Height: 16"
  • Coupler Height:  15"
  • Tilt Angle:  11 Degree
  • Safety Chains with Latch Included
  • 7,000 lb Drop Leg Set Back Jack
  • Seven way RV Plug and All DOT Required Lighting and Reflectors Included
  • Finish: Powder Coated Black

Description

Size: 80" x 12’

  • Number of Axles: 2
  • Brake Included: Yes, Both Axles
  • Gross Axle Weight Rating: 6,000 lb
  • Gross Vehicle Weight Rating: 12,000 lb
  • Weight of Trailer: 3,240 lb
  • Payload: 8,760 lb
  • Multi-Function Gate; Barn Doors and Spreader
  • 6.5’ Ramps Stored Under the Bed
  • Rims: 16" White Spoke
  • Tires: ST235/80R16; Load Range "E" Radial
  • 8 on 6.5" Bolt Circle Hubs
  • Safety Chains with Latch Included
  • 24" 11 Gauge Sides on Bed; 2"x12" board can be added for more height
  • 2-5/16" A-Frame Coupler Included
  • 77 RV Plug and All DOT Required Lighting and Reflectors Included
  • LED Lights
  • Breakaway Battery and Switch Included
  • Spare Tire Holder Included
  • 7k Dropleg Jack
  • Treadplate Fenders
  • 5 D-Rings Included Inside Bed
  • Finish: Powder Coated Black

Description

quartz 2 light

Description

This quality trailer, built by Novae, is designed with a heavy angle iron frame, C-Channel tongue, 11" rails, 2" x 6" pressure treated pine decking, protected lighting with gel filled electrical connectors, jeep style fenders and expanded metal fold flat ramp gate with self retained pins. The undercarriage includes a 3,500 lb straight EZ lube axle, leaf spring suspension, 15" new wheels and tires, A-frame tongue with 2" coupler and an A-frame jack. The powder coated finish gives the trailer a durable high gloss finish. Safety is as important to us as it is to you. CROFT only offers trailers that include all DOT required lights and reflectors as well as safety chains.

Description

HAS A 3 TON LIFTING CAPCITY FOR ENGINES ECT.

Description

JET 1-Ton Capacity TRANSMISSION JACK -- Designed for the removal and installation of auto and light truck transmissions or transfer cases. Wide stance steel frame features reinforced steel side plates that double as tool trays. Heavy-duty steel ball bearing swivel casters. Fully adjustable saddle, corner brackets and safety chains. "Quick" Lift hydraulic pump for rapid lifting to contact point without load. Safety overload and top-of-stroke bypass system provides maximum pump protection. Pump handle swivels 360° for operation in any position. Proof tested and certified. Complies with ANSI/ASME PALD-2 standards.

Description

JET 20-Ton Capacity SJ Series SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle. Compliance: ANSI/AMSE B30.1 standards
Turning bar is optional. See True Value # 724607

Description

JET 10-Ton Capacity SJ Series SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle. Compliance: ANSI/AMSE B30.1 standards. Turning bar is optional