Accuracy: ±0.5 mm at 10 m. Self-levelling range at room temperature: ±5 °. Operating range with laser receiver.

Whether you are framing, sheathing, subflooring, or bracing, BOSTITCH® makes a framing nailer that's right for you. Our framing nailers' unbeatable power-to-weight ratio helps you complete all-day jobs.

With the highest lifting height in the 500 platform, the Bobcat® T590 compact track loader is ideal for loading and unloading tasks. The Tier 4, vertical lift T590 is ideal for tasks where space is limited but the need for maximum lift height is necessary. Unmatched power to help you push through your toughest jobs. Benefit from industry-leading breakout force, rated operating capacities, faster cycle times and quicker turns.

Break through concrete, rock, and asphalt easier with the powerful force of the hydraulic breaker. The hydraulic breaker delivers maximum efficiency by matching hydraulic capacity of the carrier to the breaker, allowing consistent machine to breaker performance. It provides a quieter and smoother operation while still maintaining blows per minute.Turn your compact loader or excavator into a powerfully precise demolition machine with the hydraulic breaker attachment.

Engine Power 4 kw (Honda & Briggs), 4.3 kw (Subaru)
Maximum Trench Depth 12 or 18 inches (depends on model)
Trench Width 3 or 4 inches (depends on model)
Maximum Chain Speed 180 feet/Minute (60 meters/Minute)
Weight 230 lbs. (104.5 kg)
Length 60 in

Walk-behind trenchers are ideal for a variety of projects, and now Vermeer has one that’s so easy to use it hardly seems like work. The RTX100 features our exclusive VZ steering system, which makes steering a breeze —even in the tightest of turns. With the RTX100, users can maneuver easily into confined jobsites and even counter rotate from a stationary position. Equipped with tracks, the RTX100 offers a whole new level of flexibility and versatility for the jobsite. The rubber tracks enhance flotation and tractive effort when working in difficult ground conditions.

Size: 6’ x 12’

• Number of Axles: 1
• Gross Axle Weight Rating: 6,000 lb
• Gross Vehicle Weight Rating: 6,000 lb
• Maximun Tongue Weight: 600 lb
• Weight of Trailer: 1,660 lb
• Payload: 4,340 lb
• Torsion Axle
• 2-5/16" A-Frame Coupler Included
• 6 on 5.5" Bolt Circle Hubs
• Tires: ST235/80R16
• Rims: 15" White Spoke
• Oak Decking
• Hydraulic Brakes included
• Inside Trailer Width: 72"
• Overall Trailer Width: 96-1/2"
• Inside Trailer Height: 16"
• Overall Trailer Height: 33"
• Inside Trailer Length: 144"
• Overall Trailer Length: 206"
• Floor Height: 16"
• Coupler Height:  15"
• Tilt Angle:  11 Degree
• Safety Chains with Latch Included
• 7,000 lb Drop Leg Set Back Jack
• Seven way RV Plug and All DOT Required Lighting and Reflectors Included
• Finish: Powder Coated Black

Size: 80" x 12’

• Number of Axles: 2
• Brake Included: Yes, Both Axles
• Gross Axle Weight Rating: 6,000 lb
• Gross Vehicle Weight Rating: 12,000 lb
• Weight of Trailer: 3,240 lb
• Payload: 8,760 lb
• Multi-Function Gate; Barn Doors and Spreader
• 6.5’ Ramps Stored Under the Bed
• Rims: 16" White Spoke
• Tires: ST235/80R16; Load Range "E" Radial
• 8 on 6.5" Bolt Circle Hubs
• Safety Chains with Latch Included
• 24" 11 Gauge Sides on Bed; 2"x12" board can be added for more height
• 2-5/16" A-Frame Coupler Included
• 77 RV Plug and All DOT Required Lighting and Reflectors Included
• LED Lights
• Breakaway Battery and Switch Included
• Spare Tire Holder Included
• 7k Dropleg Jack
• Treadplate Fenders
• 5 D-Rings Included Inside Bed
• Finish: Powder Coated Black

use for sweeping up nails and metals

3/4-6"

1/2-5"

Flexible steel tape pulls cable & wire

• Comfort Formed Grip reduces forearm strain (new grip is BETTER than pictured)
• Wires attach to pulling loop
• Tape is 1/8'' W x 1/16'' thick x 50 feet
• Reel winds up & stores excess tape
• High Impact Case For Maximum Durability
• pulls cable & wire through drywall, conduit, pipe

Powerful Baldor Dual Voltage 1.5HP 115V/13.4A 230V/6.7A 60 Hz Electric Motor

• Motor with Thermal Overload protection
• Reinforced, jig-welded steel frame minimizes vibration and assures accurate cutting
• Rugged aluminum conveyor cart for optimum stability, travel
• Open back design permits orientation for cutting large materials
• Balanced easy-tilt cutting head gives operator relief in high tempo operations
• Mounted carrying handles for easy transport
• Stay-level blade guard for operator safety
• High flow water pump included

Max depth - 3 3/4"

• Uses 12 amps
• 120 lbs

TM-75 Specifications
Motor (HP) 0.75
Cuts This Tile Size In Half (in) 14
Cuts This Tile Size Diagonally (in) 10
Blade Guard Capacity (in) 8
Blade Shaft Diameter (in) 5/8
Blade Shaft Speed (RPM) 3300
Max Cutting Depth (in) 1.6
Voltage 115

DEPTH 7 "    WIDTH  2"
BERM BLADE DEPTH 6"  WIDTH 7"
CAN NOT CUT THRU GRAVEL DRIVEWAY
WILL CUT ROOTS TO A POINT.

for removing shingles

4",6",8",10",12"

3'

2'

hand post hole digger

measuring wheel