Product Catalog

Description

Rust-Oleum Striping Machine easy to apply sharp, crisp lines. Adjustable stripe width from 2" to 4", heavy duty wheels and comfortable trigger grip

Description

Cutter 1/8"-2", Heavy-Duty 2-A

Description

48" Pipe Wrench, lightweight aluminum 848

Description

36" Pipe Wrench lightweight aluminum 836

Description

Pipe Wrench 24" lightweight aluminum 824

Description

Pipe Wrench 18" lightweight aluminum 818

Description

Pipe Wrench 14" lightweight aluminum 814

Description

The easy to use 402 Porta Nailer is the finest most versatile flooring nailer on the market and comes ready to angle nail 5/8, 3/4 and 33/32 In. thick tongue and groove flooring. The nailer will also nail 3/8 -9/16 In. floors, metric configurations including bamboo and can be converted for face nailing by changing accessory shoes (sold separately). PNI’s “Preferred-Seating" System uses an exclusive ratcheting ram to ensure nails are properly seated and flooring strips are tightly driven together. The patented “anti-split” nail cuts through wood without splitting your floor and three lengths of nails will insure you have the right fastener for the job. The nail’s wide head and grapple barb design provides superior holding power. Porta-Nailers are world-renowned by professionals and do-it yourselfers alike and are designed to protect today’s Pre Finished Surfaces and positions easily on your wood floor to insure proper nail placement. Made with

Description

The Multiquip TP24 is a high usage, flexible saw designed to provide professional cutting performance on ceramics, stone and masonry materials. A hardy steel precision frame and easily removable thermal plastic water tray and back-splash provides overall durability and longevity. The saw use a powerful 2 HP 115V 13A 50/60Hz electric motor

Description

3000 PSI @ 3.0 GPM Belt Drive Steel Frame Pressure Washer, 270cc Honda GX270 OHV With Low Oil Shut Down

Description

2700 PSI @ 2.4 GPM Direct Drive Aluminum Frame Pressure Washer, 196cc Honda GX200 OHV With Low Oil Shut Down

Description

15A Super Sawzall

Description

The Marco 3.5 M-Series Blast Pot combines a low loading height with our most popular remote control system, the KwikFire 125 System, and the precise metering capability of the Bantam Metering Valve. The low loading height makes the M-Series blast pot truly easy to fill with bagged abrasive. The pneumatic (shown) or electric (see options below) control system is mounted on the side of the vessel to provide easy access to the valves, while also allowing it to fit through standard doorways. All M-Series blast pots are rated at 150 psi working pressure for use with today’s high output compressors, providing higher blasting pressure at the nozzle, which increases productivity. The M-Series Blast Machine can handle the roughest jobs!

FEATURES:

  • Heavy Duty Handle - Permanently attached handle for ease of moving

Description

JET 1-Ton Capacity TRANSMISSION JACK -- Designed for the removal and installation of auto and light truck transmissions or transfer cases. Wide stance steel frame features reinforced steel side plates that double as tool trays. Heavy-duty steel ball bearing swivel casters. Fully adjustable saddle, corner brackets and safety chains. "Quick" Lift hydraulic pump for rapid lifting to contact point without load. Safety overload and top-of-stroke bypass system provides maximum pump protection. Pump handle swivels 360° for operation in any position. Proof tested and certified. Complies with ANSI/ASME PALD-2 standards.

Description

JET 20-Ton Capacity SJ Series SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle. Compliance: ANSI/AMSE B30.1 standards
Turning bar is optional. See True Value # 724607

Description

JET 10-Ton Capacity SJ Series SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle. Compliance: ANSI/AMSE B30.1 standards. Turning bar is optional

Description

FS 400 18" walk behind gas saw is perfect for small concrete or asphalt road repair jobs. It is also a good saw for making trenches for pip laying, expansion joints, and cutting channels for impednace loop fittings or cable-laying

Description

Hilti Rotating Laser PR 25 IF

Description

7" Floor edger runs at 3600 RPM is powerful enough for the toughest job and finishes beautifully

Description

The Hand drain cleaner is a simple, manual powered unit for sinks, showers,etc. The 1/4" cable is extra flexible for the even smallest inside drain line

Description

The Model K is an economical and lightweight alternative for cleaning 1 1/4" to 3" lines up to 50ft. Works well on downspouts

Description

This hand held drill powered drain cleaner includes a variable speed commercial grade drill to clean sinks, showers and tubs

Description

The Model R Drain Cleaner is professionally engineered to clean 3"-6" drain lines for distances up to 100ft. The unit features a heavy duty 1/3HP motor,extra large steel tubing frame, and snap-lock tool connectors which eliminates screws rusting or losing a tool in the line. This Model r is set up with a larger 3/4" diameter cable for maximum performance and durability

Description

Upholstery tool with see-through window and hose assembly complete with durable hose bag